ATI Technologies X1950 PRO L

1Turn off the computer, monitor, and other peripheral devices.

2Unplug the computer’s power cord and disconnect all cables from the

back of your computer.

3Remove the computer cover.

If necessary, consult your computer’s manual for help in removing the

cover.

4Unscrew or unfasten and remove any non-CrossFire™ supported

graphics card from your computer.

5Locate the PCI Express® slots on the motherboard. If necessary, remove

the metal backplate cover from the case housing.

6Align your Radeon® X1950 Pro graphics card in the secondary PCIe slot

next to the primary Radeon® X1950 Pro graphics card and press firmly

until the card is fully seated.

1Remove protection tags from the connectors at each end of the

CrossFire™ Bridge Interconnect.

LWARNING - Wait approximately 20 seconds after unplugging the

power cord before disconnecting a peripheral or removing a

component from the motherboard to avoid possible damage to the

motherboard.

LWARNIN G - Discharge your body’s static electricity by touching the

power supply or the metal surface of the computer chassis. Otherwise,

you may damage your system.

LWARNING - Always handle the CrossFire™ Bridge

Interconnects by the connector only. Do not push or pull on

the flexible circuit cabl