WebShare 144WN

The following table describes the labels in this screen.

LabelDescription
New Password

Type the new password in this field.

Confirm PasswordType the new password again in this field.

Save

Click Apply to save your changes back to the ADSL Router.

Cancel

Click Cancel to begin configuring this screen afresh.

3.8 Resetting the ADSL Router

If you forget your password or cannot access the WebShare Wireless Router ADSL2+, you will need to reload the factory-default configuration file or use the RESET button the back of the ADSL Router. Uploading this configuration file replaces the current configuration file with the factory-default configuration file.

3.8.1 Using The Reset Button

Step 1. Make sure the SYS LED is on (not blinking).

Step 2. Press the RESET button for 10 (or more) seconds, and then release it. When the SYS LED begins to blink, the defaults have been restored and the ADSL Router restarts.

A02-RA144-W300N

Pag. 25