WebShare 144WN

 

 

 

 

 

 

 

a packet broadcast by the Router to synchronize the wireless

 

 

 

network.

 

 

 

RTS/CTS

 

The RTS (Request To Send) threshold (number of bytes) for

 

Threshold

 

enabling RTS/CTS handshake. Data with its frame size larger

 

 

 

than this value will perform the RTS/CTS handshake. Setting

 

 

 

this attribute to be larger than the maximum MSDU (MAC

 

 

 

 

 

service data unit) size turns off the RTS/CTS handshake.

 

 

 

 

Setting this attribute to zero turns on the RTS/CTS handshake

 

 

 

 

Enter a value between 1500 and 2347.

 

 

 

Fragmentation

 

The threshold (number of bytes) for the fragmentation

 

Threshold

 

boundary for directed messages. It is the maximum data

 

 

 

fragment size that can be sent.

 

 

 

 

 

Enter a value between 256 and 2346.

 

 

 

 

 

 

 

 

DTIM

 

This value, between 1 and 255, indicates the interval of the

 

 

 

Delivery Traffic Indication Message (DTIM).

 

 

 

 

 

 

 

 

 

 

Wireless Mode

 

The default setting is 802.11b+g+n (Mixed mode). If you do

 

 

 

not know or have both 11g and 11b devices in your network,

 

 

 

then keep the default in mixed mode. From the drop-down

 

 

 

 

manual, you can select 802.11g if you have only 11g card. If

 

 

 

 

you have only 11b card, then select 802.11b and if you only

 

 

 

 

have 802.11n then select 802.11n.

 

 

 

 

 

11n Settings

 

 

 

Label

 

Description

 

 

 

Channel

 

Select either 20 MHz or 20/40 MHz for the channel bandwidth.

 

Bandwidth

 

The higher the bandwidth the better the performance will be.

 

Guard Interval:

 

Select either 400nsec or 800nsec for the guard interval. The

 

 

 

guard interval is here to ensure that data transmission do not

 

 

 

interfere with each other, it also prevents propagation delays,

 

 

 

 

echoing and reflections.

 

 

 

MCS

 

There are options 0~15 and AUTO to select for the

 

 

 

Modulation and Coding Scheme. We recommend users

 

 

 

selecting AUTO.

 

 

 

 

 

SSIDs Settings

 

 

 

Label

Description

 

 

 

SSID Index

Default SSID. index is “1”

 

 

 

Broacast

The SSID is the unique name of a wireless access point (AP) to

 

SSSID

be distinguished from another. For security propose, change

 

 

the default wlan-apto a unique ID name to the AP which is

 

 

already built-in to the router’sis

wicase

 

 

 

sensitive and must not excess 32 characters. Make sure your

 

 

 

 

A02-RA144-W300N

Pag. 39