WebShare 144WN

 

 

 

 

wireless clients have exactly the SSID as the device, in order to

 

 

get connected to your network.

 

WMM

In order to increase the performance of Multimedia data, please

 

 

select Enable.

 

WPS

Select Yes in order to use WPS.

 

 

WPS Settings

Label

Description

 

WPS State

Displays whether the WPS is configured or unconfigured.

 

WPS Mode

Select the mode which to start WPS, choose between PIN Code

 

 

or PBC (Push Button). Selecting Pin Code mode will require

 

 

you to know the enrollee PIN code.

 

SSSID

Type in the Service Set Identifier name, it is the unique name of

 

 

a wireless access point (AP) to be distinguished from another.

 

Authentication

To prevent unauthorized wireless stations from accessing data

Type

transmitted over the network, the router offers highly secure

 

data encryption, known as WEP.&WPA. If you require high

 

security for transmissions, there are two alternatives to select

 

from: 64-bit WEP and 128-bit WEP. WEP 128 will offer

 

increased security over WEP 64.

 

You can disable or enable with WPA or WEP for protecting

 

wireless network. The default type of wireless is disabled and to

 

allow all wireless computers to communicate with the access

 

points without any data encryption.

The range of radio frequencies used by IEEE 802.11g wireless devices is called a “channel”. geographical area. You may have a choice of channels (for your region) so you should use a different channel than an adjacent AP (access point) to reduce interference. Interference occurs when radio signals from different access points overlap causing interference and degrading performance.

Adjacent channels partially overlap however. To avoid interference due to overlap, your AP should be on a channel at least five channels away from a channel that an adjacent AP is using. For example, if your region has 11 channels and an adjacent AP is using channel 1, then you need to select a channel between 6 or 11.

A02-RA144-W300N

Pag. 40