
|
| WebShare 144WN |
|
| |
| line and set it up for DSL service. | |
3 | Reset your ADSL line to reinitialize your link to the DSLAM. For | |
| details, refer to the Maintenance chapter (web configurator) or | |
| the System Information and Diagnosis chapter. | |
4 | If these steps fail to correct the problem, contact your local | |
| distributor for assistance. |
A.2 Telnet
I cannot telnet into the ADSL Router.
STEPS | CORRECTIVE ACTION |
1 | Check the LAN port and the other Ethernet connections. |
2 | Make sure you are using the correct IP address of the ADSL |
| Router. Check the IP address of the ADSL Router. |
3 | Ping the ADSL Router from your computer. |
| If you cannot ping the ADSL Router, check the IP addresses of |
| the ADSL Router and your computer. Make sure your computer |
| is set to get a dynamic IP address; or if you want to use a static |
| IP address on your computer, make sure that it is on the same |
| subnet as the ADSL Router. |
4 | Make sure you entered the correct password. The default |
| password is “admin”. |
| If you have forgot your username or password, refer to Section |
| A.5. |
5 | If these steps fail to correct the problem, contact the distributor. |
A.3 Web Configurator
I cannot access the web configurator.
STEPS | CORRECTIVE ACTION |
|
|
1 | Make sure you are using the correct IP address of the ADSL |
| |
| Router. Check the IP address of the ADSL Router. |
| |
2 | Make sure that there is not an console session running. |
| |
3 | Check that you have enabled web service access. If you have |
| |
| configured a secured | client |
|
| address must match it. Refer to the chapter on remote |
| |
| management for details. |
|
|
4 | For WAN access, you must configure remote management to |
| |
| allow server access from the Wan (or all). |
|
|
5 | Your computer’s and the ADSL |
| |
| on the same subnet for LAN access. |
|
|
| Pag. 84 |