WEBSHARE 242W

 

 

 

 

• Green for 100Mbps; Orange for 10Mbps

 

 

• Blinking when data transmit/received.

 

ADSL

Lights when successfully connected to an ADSL DSLAM.

 

 

 

 

PPP

Steady glow when there is a PPPoA / PPPoE connection.

 

2.3 The Rear Ports

PORT

Meaning

 

 

LINE

Connect the supplied RJ-11 cable to this port when

 

connecting to the ADSL/telephone network.

LAN

Connect an UTP Ethernet cable to one of the four LAN ports

 

when connecting to a PC or an office/home network of

 

10Mbps or 100Mbps.

RESET

Recovery procedures for a lost web interface password:

 

After turning the router on press the Emergency/Failure

 

Recovery Button on the back of the modem, and hold the

 

button in until all lights on the modem flash and it reboots with

 

factory default settings. The login will be reset to admin and

 

the password will be reset to atlantis, and the modem will be

 

accessible via its default IP address at http://192.168.1.254/

 

This is used when you can not login to the router, e.g. forgot

 

the password)

PWR

Connect the supplied power adapter to this jack.

POWER (Switch)

A Power ON/OFF switch.

2.4 Cabling

The most common problem is bad cabling or ADSL line. Make sure that all connected devices are turned on. On the front of the product is a bank of LEDs. As a first check, verify that the LAN Link, ADSL , PWR, SYS LEDs are lit. If they are not, verify that you are using the proper cables.

Ensure that all other devices connected to the same telephone line as your router (e.g. telephones, fax machines, analog modems) have a line filter (A01-AF2) connected between

7