WEBSHARE 242W
3.6.3.2 WAN
Before you start installing this device, you have to check with your ISP what kind of service (connection method) is provided such as PPPoE, PPPoA, RFC1483 bridged or routed, IPoA. Gather the information as illustrated in the following table and keep it for reference.
PPPoE | VPI/VCI, |
| Username, Password, Service Name, and |
| Domain Name System (DNS) IP address (it can |
| be automatically assigned from ISP or be set |
| fixed). |
PPPoA | VPI/VCI, |
| Username, Password, and Domain Name |
| System (DNS) IP address (it can be |
| automatically assigned from ISP or be set |
| fixed). |
|
|
RFC1483 | VPI/VCI, |
Bridged |
|
RFC1483 | VPI/VCI, |
Routed | address, Subnet mask, Gateway address, and |
| Domain Name System (DNS) IP address (it is |
| fixed IP address). |
|
|
IPoA | VPI/VCI, IP address, Subnet mask, Gateway |
| address, and Domain Name System (DNS) IP |
| address (it is fixed IP address). |
|
|
A WAN (Wide Area Network) is an outside connection to another network or the Internet. There are three items within the WAN section: ISP, DNS and ADSL.
3.6.3.2.1 ISP
The factory default is PPPoE. If your ISP uses this access protocol, click Edit to input other parameters as below. If your ISP does not use PPPoE, you can change the default WAN connection entry by clicking Change.
A simpler alternative is to select Quick Start from the main menu on the left. See the Quick Start section of the manual for more information.
Click Next in order to finish the configuration.
30