WEBSHARE 242W

3.4 Factory Default Settings

Before configurating this WebShare 242W Wireless , you need to know the following default settings.

•Username: admin

•Password : atlantis

•IP Address : 192.168.1.254

•Subnet Mask : 255.255.255.0

•DHCP server is enabled.

3.4.1 Username and Password

The default username and password are admin and atlantis respectively.

If you ever forget the password to log in, you may press the RESET button to restore the factory default settings. After turning the router on press the Emergency/Failure Recovery Button on the back of the modem, and hold the button in until all lights on the modem flash and it reboots with factory default settings (approximately 10 seconds). The login will be reset to admin and the password will be reset to admin, and the modem will be accessible via its default IP address at http://192.168.1.254/

3.4.2 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.

17