WEBSHARE 242W

3.6.3.7 Advanced

Configuration options within the Advanced section are for users who wish to take advantage of the more advanced features of the router. Users who do not understand the features should not attempt to reconfigure their router, unless advised to do so by support staff.

Static Route

Dynamic DNS

VLAN Control

Device Management

IGMP

3.6.3.7.1 Static Routed

Click on the Static Routing and then choose Create IP V4Route to get the below figure to add a routing table.

Destination: Enter the destination subnet IP.

Gateway: Enter the gateway IP address which the packet is forwarded to.

Netmask: Subnet mask of destination IP addresses based on above destination subnet IP.

Cost: This is the same meaning as Hop. Usually, leave it as 1.

Interface: Enter the interface, which the packet is forwarded to.

66