WEBSHARE 242W

3.6.3.1.2 Wireless

•Mode: 802.11b + g (Mixed mode), 802.11b and 802.11g. The factory default is 802.11b + g.

•ESSID: Enter the unique ID given to the Access Point (AP), which is already built-in to the router’s wireless interface. To connect to this device, your wireless clients must have the same ESSID as the device.

•Regulation Domain: There are five Regulation Domains for you to choose from, including North America (N.America), Europe, France, etc. The Channel ID will be different based on this setting.

•Channel ID: Select the ID channel that you would like to use.

•MAC Address: The AP’s MAC Address

•AP Version: The Access Point firmware version.

•WDS Service:

WDS (Wireless Distribution System) uses wireless media to communicate with other APs. It is able to extend the effective range and coverage of the wireless network. Please make sure the SSID is the same as that AP you want to extend. Wireless LAN is Half Duplex, so one transaction pass-through 2 wireless its real data-rate will be half of normal one. In figure an example of configuration.

25