JVC KD-SH9105 manual English, Adjust the DSP effect level-1,2, or, Listening seat position

ENGLISH

3 Adjust the DSP effect level—1, 2, or

3.

	The selected DSP effect
ATT	level is valid for all DSP
	modes except “V.CANCEL.”
	• As the number increases,
	the effect level becomes
	stronger.

Ex. When “Dome” is selected in the previous step

To cancel the DSP modes, select “DEFEAT” in

step 2.

To exit from the DSP mode selection screen,

press SEL (select) repeatedly or wait for about 15

seconds.

To make further precise settings for the DSP modes

You can also make further precise settings to make the best sound field in your car compartment. These settings you make are valid for all DSP modes except “V.CANCEL.”

Setting items:

The number of the built-in speakers :

Select the number of the speakers built in your car—“2ch” or “4ch.”

•When you have four speakers (4ch) built in your car, select your car size (see step 5 on page 27).

Listening seat position:

Select the listening seat position where you want to locate the sound image.

1 Press SEL (select) once to show the DSP mode selection screen.

The currently activated DSP

SEL mode appears on the display.

Ex. When “Dome” is selected previously

•If the DSP mode is not activated

(“DEFEAT” is selected), you cannot go to the next step. Select one of the DSP modes first.

26