To show the graphics on the display- Graphics

To show the graphics on the display— Graphics

You can change the graphics shown on the display. These graphics appear if no operation is done for about 20 seconds (except for “ImageLink”).

•All Demo: Display demonstration (animation) appears (see page 8).

•Int Demo: Display demonstration (animation) and playback source indication appears alternately (see page 8).

•UserMovie: Your edited animation appears (see pages 37 and 38).

•UserSlide: Your edited still images appears in sequence (see pages 37 and 38).

•UserPict.: One of your edited still image appears (see pages 37 and 38).

•ImageLink: To show a still image while playing back an MP3/WMA tracks (see page 17).

• Off:

Cancels all graphic display above.

Note:

You can select “UserMovie,” “UserSlide,” and “UserPict.” only after downloading the appropriate files in memory. (See page 33.)

When changing the source, the display shows the source animation. You can select the source animation on the display according to your preference.

•	Long:	A long source animation appears.
•	Short:	A short source animation appears.
•	Off:	Cancels the source animation.

When a disc information is emphasized at the center of the display, it is shown entirely by scrolling if it cannot be shown at a time.

Note:

Even if the scroll mode is set to “Off,” you can scroll the display by pressing DISP (D) for more than 1 second.

You can adjust the display contrast level among 1 to 10.

Adjust it to make the display indications clear

and legible.

To select the display illumination pattern

You can select the display illumination patterns according to your preference.

• Auto:	Positive pattern will be selected
	during the day time (depending on
	the “Dimmer” setting); on the other
	hand, negative pattern will be used
	during the night time (depending on
	the “Dimmer” setting).

•Positive: Positive (normal) pattern of the display.

•Negative: Negative pattern of the display.

CONTINUED ON THE NEXT PAGE

ENGLISH