JVC KD-SH9105 Basic Operations, Turning on the power, English, To drop the volume in a moment

BASIC OPERATIONS

SRC D

DISP

Display indication:

If you have changed some PSM items (see

ENGLISH

ATT

BBE

							MODE
SEL	1	2	3	4	5	6	M

2 1, 3

page 40), the indications on the display you see may be different from those used in this manual.

Turning on the power	3 Adjust the volume.
1 Turn on the power.	ATT
ATT

Clock time

Note on One-Touch Operation:

When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.

2 Select the source.

Current DSP mode (see page 25)

Current sound (iEQ) mode (see page 28)

4

SRC

Each time you press the button,

the source changes as follows.

Select the DSP mode and sound mode as you want.

TUNER	*1		*2		*3
		CD		CD-CH	LINE IN
				(CD changer)

*1 If a disc is not in the loading slot, you cannot select CD as the source to play.

*2 Without connecting the CD changer, you cannot select it as the source to play.

*3 When “Line In” is set to “Off” in the PSM setting, you cannot select “LINE IN” as the source (see page 42).

To drop the volume in a moment

Press briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.

To resume the previous volume level, press the button briefly again.

•If you turn the control dial, you can also restore the sound.

To turn off the power

Press for more than 1 second.

•If you turn off the power while listening to a disc, playback will start from where playback has been stopped previously, next time you turn on the power.

7