JVC KD-SH9105 manual Selecting the level meter, Standard, English, Meter, Set the clock system

5 Set the clock system.

1Select “24H/12H.”

2Adjust “24Hours” or “12Hours.”

1 2

ATT

6 Finish the setting.

SEL

To check the current clock time when the unit

is turned off, press DISP (D).

The power turns on and the clock time is shown for about 5 seconds, then the power turns off.

4 Select the level meter pattern you want.

As you turn the control

ATT dial, the level meters

change as follows:

Standard Meter 1

Meter 3Meter 2

5 Finish the setting.

SEL

Standard:

No level meter appears on the display. (Initially selected when shipped from the factory.)

ENGLISH

Selecting the level meter

You can show the level meters on the display while playing any source. This unit is equipped with three level meter patterns.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 40.)

SEL

2 Press number button 3 to select “DISP”—Display category of the PSM settings.

3

3 Select “Theme.”

Meter 1:

The left and right audio level meters appear.

Meter 2:

Level meters fluctuate horizontally from center to both sides as audio levels changes.

Meter 3:

Signal waves fluctuate at the center and spread outward.

9