JVC KD-SH9105 manual Radio Operations, Searching a station automatically Auto search

ENGLISH

RADIO OPERATIONS

SRCD

DISP

ATT

BBE

							MODE
SEL	1	2	3	4	5	6	M

Listening to the radio	Note:
	This receiver has three FM bands (FM1, FM2,
You can use either automatic searching or manual	FM3). You can use any one of them to listen to an
	FM broadcast.
searching to tune in to a particular station.

Searching a station automatically: Auto search

1 Select the band (FM1 – 3, AM).

2 Start searching a station.

Press ¢ to search stations of higher frequencies.

SRC

AM FM1

FM3 FM2

1Press SRC (source) repeatedly to select the tuner.

2Press and hold SRC for more than 1 second.

The band indication on the display starts flashing.

3Within about 5 seconds (while the band indication is flashing), press SRC again. Each time you press the button, the band changes.

Press 4 to search stations of lower frequencies.

Ex. When the band is FM

When a station is received, searching stops.

Last received station of the selected band is tuned in.

If a name has been assigned to the station (see page 44), the assigned name appears.

To stop searching before a station is received, press the same button you have pressed for searching.

10

Lights up when receiving an FM stereo broadcast with sufficient signal strength.