JVC KD-SH9105 Making sounds natural -BBEDigital, English, Show the BBE Digital adjustment screen

Models: KD-SH9105

1 69
Download 69 pages 48.59 Kb
Page 31
Image 31
To adjust the input level of each source

To adjust the input level of each source

—Vol Adj:

This setting is required for each source except FM. Before making an adjustment, select an appropriate source for which you want to make an adjustment.

Once you have made an adjustment, it is memorized, and you will not need to adjust the volume level each time you change the source.

Adjust to match the input level to the FM sound level.

You cannot make an adjustment if the source is FM. “FIX” will appear.

Making sounds natural —BBE Digital

BBE Digital* is a new digital processing method to restore the brilliance and clarity of the original live sound in recording, broadcasts, etc.

When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high-frequency sounds to take longer to reach the ear than low frequency sounds. BBE Digital adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that all frequencies reach the listener’s ears at the proper time.

ENGLISH

ATT

To increase the level.

1 Show the BBE Digital adjustment screen.

To decrease the level.

BBE

The current BBE level is shown

on the display.

If the Making sounds natural —BBE Digital1 Show the BBE Digital adjustment screen.2 Select the effect level. BBE 1BBE 2 BBE 3*Manufactured under license from BBE Sound, Inc.Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background (INPUT OVER) indicator appears on the display, and sounds are distorted

The input level through the external component (LINE IN) is set at a high level (more than 1.5 Vrms).

If this happens, adjust the output level on the connected component so that the Manual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

(INPUT OVER) indicator will not appear.

(INPUT OVER) indicator

2 Select the effect level.

Each time you press the button,

BBE

the effect level changes as

 

follows:

Manual background BBE 1Manual backgroundBBE 2 Manual backgroundBBE 3

BBE Off

(Canceled)

As the number gets higher, the effect level becomes stronger.

When shipped from the factory, the effect level is set to “BBE Off” (BBE Digital is canceled).

Note:

If “V.CANCEL” is selected for the DSP mode, you cannot change the BBE level.

*Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound , Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

31

Page 31
Image 31
JVC KD-SH9105 Making sounds natural -BBEDigital, English, Show the BBE Digital adjustment screen, Select the effect level