JVC KD-SH9105 manual Storing stations in memory, FM station automatic preset SSM, receive, AM FM1

	When an FM stereo broadcast is hard to
ENGLISH
	receive:
	Set the FM reception mode to “Mono On.”
	1 Press MODE (M) while listening to	MODE
	an FM stereo broadcast.	M
	“Mode” appears on the display, and

the number buttons start flashing.

2Press number button 1, while “Mode” is still on the display.

Each time you press the button, “Mono On” and “Mono Off” alternately appears.

Storing stations in memory

You can use one of the following two methods to store broadcasting stations in memory.

•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)

•Manual preset of both FM and AM stations

FM station automatic preset: SSM

You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).

1 Select the FM band (FM1 – 3) you want to store FM stations into.

1 2 3 4 5 6

After about 5 seconds

The display returns to the source indication screen.

SRC

AM FM1

FM3 FM2

1Press SRC (source) repeatedly to select the tuner.

2Press and hold SRC for more than 1 second.

The band indication on the display starts flashing.

3Within about 5 seconds (while the band indication is flashing), press SRC again. Each time you press the button, the band changes.

MO indicator appears

2 Start SSM.

MODE1 Press MODE (M). “Mode” appears on the

Mdisplay, and the number buttons start flashing.

2 Press and hold number

5button 5 until “– SSM –” appears.

Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No.1 (lowest frequency) to No.6 (highest frequency).

When automatic preset is over, the station stored in number button 1 will be automatically tuned in.

12