Selecting a preset station using the

ENGLISH

preset station list

 

 

If you forget what stations are stored in what

 

preset numbers, you can check the preset station

 

list, then select your desired station on the list.

 

1 Select the band (FM1 – 3, AM).

Changing the display pattern

By pressing DISP (D), you can change the information shown on the display.

DEach time you press the button, the

DISP

display patterns change as follows:

 

SRC

AM FM1

FM3 FM2

1Press SRC (source) repeatedly to select the tuner.

2Press and hold SRC for more than 1 second.

3Within about 5 seconds, press SRC again.

Each time you press the button, the band changes.

Initial display pattern:

*1*2

2 Press and hold 5(up) or (down) until the preset station list for the current band (FM1, FM2, FM3, or AM) appears on the display.

The currently received station will

be highlighted on the display.

Notes:

If one of FM band preset station lists (FM1, FM2, or FM3) is shown on the display, you can show the other lists by pressing 5 (up) or

(down).

If a name has been assigned to a station (see page 44), it will be shown instead of the station frequency.

3 Select the number (1 – 6) for the preset station you want.

1

2

3

4

5

6

Assigned station name is emphasized:

*1 If a name has been assigned to a station, it will be shown instead of “No Name.”

*2 Appears only when selecting a preset station.

If the sound quality decreases and the stereo effect is lost while listening to an FM station

In some areas, adjacent stations may interfere with each other. If this interference occurs, this unit can automatically reduce this interference noise (initial factory setting). However, in this case, the sound quality will be degraded and the stereo effect will be also lost.

If you do not want to degrade the sound quality and to lose the stereo effect, rather than to eliminate the interference noise, see “To change the FM tuner selectivity—IF Filter” on page 42.

14

Page 14
Image 14
JVC KD-SH9105 manual Preset station list, Selecting a preset station using, Initial display pattern