System
This summary is followed by examples in subsequent sections. Examples will be given in the following format:
Command Syntax
Description: the description of the command is given here.
Example:

Router> command (with parameters)

Output …

Command List
Note that commands may apply either to a specific router model or with a particular Feature Key
enabled. Each command below which is affected, is identified by a symbol which is associated with
either a router model or a Feature Key as follows:
In addition, those commands which involve an interactive user dialog are prefixed with the symbol,
“⊕”.

Bridging Commands

Disable bridging <Interface Name>
Disable learning
Enable bridging <Interface Name>
Enable learning
Show bridging
Show learning
Show learning <Interface Name>

Compression Commands

clear compression statistics <Profile Name>
disable compression <Profile Name>
enable compression <Profile Name>
show compression statistics <Profile Name>