enter upper bound address (192.168.168.254):
enter lower bound address (192.168.168.1):
show dhcp
Description: This command displays the current status of the Dynamic Host Control Protocol server.
Example:
Router> show dhcp
Admin Status: Enable Default Lease: 10 hours
Network address: 192.168.168.0 Netmask: 255.255.255.0
Default gateway: 192.168.168.230
Primary DNS: 199.191.129.139 Secondary DNS: 199.191.144.75
Primary WINS: 63.221.98.5 Secondary WINS:63.221.98.7
Node Type h-node
IP-Address Mac-Addr Lease-Expires Entry Type
-----------------------------------------------------------------
192.168.168.134 00400535db4f 06-15-99 14:24:5 Static
192.168.168.254 222222222222 06-15-99 16:43:7 Dynamic
show dhcp table
Description: This command displays the entries currently configured in the Static DHCP Assignment
Table
Example:
Router> show dhcp table
Static DHCP Assignments
Name IP-Address Mac-Address
----------------------------------------------------------------
daniel 192.168.168.134 00-40-05-35-DB-4F
show range
Description: This command displays the upper and lower bound addresses currently being used for
the dynamic assignment of private IP addresses to DHCP clients and dial in users. (See “set range,
above)
Example:
Router> show range
IP address assignment range: 192.168.168.1 – 192.168.168.254