Manuals / Brands / Computer Equipment / Network Router / Atlantis Land / Computer Equipment / Network Router

Atlantis Land Mistral Lan Router ISDN show learning , show learning <Interface Name> , Compression Commands , clear compression statistics <Profile Name>

1 48

Download 48 pages, 318.6 Kb

show learning

Description: This command displays MAC addresses learned from all bridging-enabled interfaces.

Example:

Router> show learning

lan: MAC Address

------------------------------------------------

12-22-33-3D-D5-00

00-60-54-16-67-01

00-96-33-58-BD-DE

Total MAC addresses: 3

newyork: MAC Address

------------------------------------------------

00-40-33-3D-D5-DB

00-60-20-16-00-01

00-40-33-58-07-DE

Total MAC addresses: 3

show learning <Interface Name>

Description: This command displays MAC addresses learned from a specified interface.

Example:

Router> show learning lan

MAC Address

---------------------------

00-40-33-3D-D5-DB

00-60-20-16-00-01

00-40-33-58-07-DE

Total MAC addresses: 3

Compression Commands

Compression can be enabled over serial interfaces running the PPP protocol in order to allow more

efficient use of the WAN bandwidth. Currently, STAC based compression is supported. In units

containing hardware-assisted compression, these commands will automatically utilize this resource.

Note that these commands cannot manage the operation of modem-based compression (MNP5/V.42).

Modem initialization strings manage this type of compression.

clear compression statistics <Profile Name>

Description: The statistics counters associated with compression over the specified interface are reset.

Contents

Main Mistral Lan Router ISDN with 4 Fast Ethernet ports + Broadband Interface Page Console Commands General Guidelines Express Mode vs. Advanced Mode Conventions Command Categories From a functional point of view, commands can be grouped into the following functional categories: Router> command (with parameters) Output Command List Bridging Commands Compression Commands DHCP Commands Diagnostic Commands Dial-in User Commands Filtering Commands IP Commands Port Commands Profile Commands Security Command SNMP Commands Statistics Commands System Commands Page Page show learning show learning <Interface Name> Compression Commands clear compression statistics <Profile Name> disable compression <Profile Name> enable compression <Profile Name> show compression statistics <Profile Name> DHCP Commands add dhcp entry <entry name> add dns <primary/secondary> <IP_addr> delete dhcp entry <entry name> delete dns <primary/secondary> disable dhcp enable dhcp set dhcp set range show dhcp show dhcp table show range Page test isdn <dial name> <64k/56k> Dial-in User Commands add user <profile name> (where profile name is a string <= 30 chars) Add the following Single Workstation dialing into the router using the CLI Advanced Mode delete user <profile name> Description: Deletes a dial-in user entry from the local user database. show user [profile name] Example 2: When a specific user is named, the output appears as follows: Filtering Commands add filter <1-8> delete filter <1-8> set filter default show filter show filter <1-8 > add pat entry <public port #> add pat entry default Page ping <ipAddr> [n_times] [n_size] set ip default route <gateway-ipAddr> set ip default route <Profile Name> set ip lan <ip_addr> <netMask> set ip private <ip_addr> <netMask> set ip rip [Interface Name] <disabled/passive/active> <rip1/rip2> set ip <Profile Name> set ip <Profile Name> < local-ipAddr> <netMask> <remote-ipAddr> 255.255.255.0. show arp table show icmp statistics show ip show ip <interface name> show ip routing table Host S Static Route G Gateway C Cloned Entry Example: show ip statistics Description: This csommand displays IP routing related statistics. Example: show pat show tcp statistics show udp statistics Port Commands clear port statistics [port name] disable port <port name> enable port <port name> set port <port name> show port show port <port name> Description: This command displays the configuration of a WAN interface port. Example 1: Example 2: show port statistics <port name> Example 1: Profile Commands add profile <Profile Name> clear profile statistics [Profile Name] connect profile <Profile Name> delete profile <Profile Name> disable profile <Profile Name> disconnect profile < Profile Name> enable profile <Profile Name> show profile show profile <Profile Name> Page disable trap enable trap set community string read <"password"> set trap manager <1-5> <ipAddr> show snmp statistics Page Page Page logout reset system save config set console baud <baudrate> set console timeout <1-60> set date <mm-dd-yy> set daylight time <on/off> set internet access time set log level <1-10> set prompt <prompt> set system contact <name> set system location <location information> set system name <system name> set time <hh:mm:ss> set timezone <-12 - +12> show config show connection log show interface list show internet access time show system show system log