Manuals / Brands / Computer Equipment / Network Router / Atlantis Land / Computer Equipment / Network Router

Atlantis Land Mistral Lan Router ISDN disable port <port name> enable port <port name> , set port <port name> , show port

1 48

Download 48 pages, 318.6 Kb

disable port <port name> enable port <port name>

Description: These two commands is used to disable or enable a port.

⊕set port <port name>

The set port command is used to initialize or modify the characteristics of a hardware port on your

router. Hardware ports are identified by port name and are model-specific. The name “ISDN” means

the ISDN BRI interface. πThe name “ewan” stands for Ethernet-based WAN port which is connected

to broadband modem.

PORT TYPE: ISDN

Description: This command configures the ISDN port. For European users, select Switch Type as

“Europe (ETSI)” and configure the related parameters.

Example:

Router> set port isdn

enter switch : 1> Japan (INS Net) 2> Europe (ETSI) 3> NT DMS-100

4> NI-1 5> ATT5ESS (MP) 6> ATT5ESS (P2P)

7> Taiwan 8> OCN 9> Permanent 64K

10> IDSL/Perm 128K 0> AutoDetect, [0]: 2

How many directory numbers [DN] are assigned (1, 0-3): 2

enter Directory Number 1 [DN1] [Unspecified]: 5551111

enter Directory Number 2 [DN2] [Unspecified]: 5552222

Port isdn is configured successfully.

Router>

πPORT TYPE: EWAN

Description: This command is used to enable the ewan port.

Example:

Router> set port ewan

Port ewan is configured successfully.

Router>

show port

Description: This command displays the configuration information for all ports.

Example:

Router> show port

Port Name : isdn Port Type : ISDN

Admin Status: Enabled Op State: Down

Contents

Main Mistral Lan Router ISDN with 4 Fast Ethernet ports + Broadband Interface Page Console Commands General Guidelines Express Mode vs. Advanced Mode Conventions Command Categories From a functional point of view, commands can be grouped into the following functional categories: Router> command (with parameters) Output Command List Bridging Commands Compression Commands DHCP Commands Diagnostic Commands Dial-in User Commands Filtering Commands IP Commands Port Commands Profile Commands Security Command SNMP Commands Statistics Commands System Commands Page Page show learning show learning <Interface Name> Compression Commands clear compression statistics <Profile Name> disable compression <Profile Name> enable compression <Profile Name> show compression statistics <Profile Name> DHCP Commands add dhcp entry <entry name> add dns <primary/secondary> <IP_addr> delete dhcp entry <entry name> delete dns <primary/secondary> disable dhcp enable dhcp set dhcp set range show dhcp show dhcp table show range Page test isdn <dial name> <64k/56k> Dial-in User Commands add user <profile name> (where profile name is a string <= 30 chars) Add the following Single Workstation dialing into the router using the CLI Advanced Mode delete user <profile name> Description: Deletes a dial-in user entry from the local user database. show user [profile name] Example 2: When a specific user is named, the output appears as follows: Filtering Commands add filter <1-8> delete filter <1-8> set filter default show filter show filter <1-8 > add pat entry <public port #> add pat entry default Page ping <ipAddr> [n_times] [n_size] set ip default route <gateway-ipAddr> set ip default route <Profile Name> set ip lan <ip_addr> <netMask> set ip private <ip_addr> <netMask> set ip rip [Interface Name] <disabled/passive/active> <rip1/rip2> set ip <Profile Name> set ip <Profile Name> < local-ipAddr> <netMask> <remote-ipAddr> 255.255.255.0. show arp table show icmp statistics show ip show ip <interface name> show ip routing table Host S Static Route G Gateway C Cloned Entry Example: show ip statistics Description: This csommand displays IP routing related statistics. Example: show pat show tcp statistics show udp statistics Port Commands clear port statistics [port name] disable port <port name> enable port <port name> set port <port name> show port show port <port name> Description: This command displays the configuration of a WAN interface port. Example 1: Example 2: show port statistics <port name> Example 1: Profile Commands add profile <Profile Name> clear profile statistics [Profile Name] connect profile <Profile Name> delete profile <Profile Name> disable profile <Profile Name> disconnect profile < Profile Name> enable profile <Profile Name> show profile show profile <Profile Name> Page disable trap enable trap set community string read <"password"> set trap manager <1-5> <ipAddr> show snmp statistics Page Page Page logout reset system save config set console baud <baudrate> set console timeout <1-60> set date <mm-dd-yy> set daylight time <on/off> set internet access time set log level <1-10> set prompt <prompt> set system contact <name> set system location <location information> set system name <system name> set time <hh:mm:ss> set timezone <-12 - +12> show config show connection log show interface list show internet access time show system show system log