Atlantis Land Mistral Lan Router ISDN set system contact <name> , set system location <location information> , set system name <system name> , set time <hh:mm:ss> , set timezone <-12 - +12>

Router> set prompt "Yes, Master"
Yes, Master>
set system contact <”name”>
Description: This command sets the system contact information. The maximum number of characters
allowed is 60. This information is displayed in the “show system” command, as well as in the “System
Information” screen in the HTTP browser screen.
Example:
Router> set system contact "John Doe, pager: (408) 731-4567"
set system location <”location information”>
Description: This command sets the system location. The maximum number of characters allowed is
60. This information is displayed in the “show system” command, as well as in the “System
Information” screen in the HTTP browser screen.
Example:
Router> set system location "480 Mercury Drive, Sunnyvale, CA 94086"
set system name <”system name”>
Description: This command sets the system name. The maximum number of characters allowed is 30.
This information is displayed in the “show system” command, as well as in the “System Information”
screen in the HTTP browser screen.
Example:
Router> set system name "Home Gateway1"
set time <hh:mm:ss>
Description: This command sets the time of the day (24-hour clock). Note that the time will normally
be set automatically when an HTTP browser first connects to the router.
Example:
Router> set time 20:33:00
set timezone <-12 - +12>
Description: This command specifies the time zone for the location as an offset from Greenwich
Mean Time (GMT). The time zone is normally set automatically when an HTTP browser first connects
to the router.
Example:
Router> set timezone -8
Time Zone is set to GMT-8 hours.