Atlas Sound XLTE Positioning and Horn Rotation, 4.8.7Front Grille, 4.8.8Enclosure Finish

4.8.641 Positioning and Horn Rotation

The 41 can be positioned in several ways. When used as a floor monitor either of the two backs may be placed on the floor to vary the aiming angle. One provides an up-angle of 30 degrees from the floor and the other an up-angle of 45 degrees from the floor. The 41 may also be used upright as a PA loudspeaker.

The 41 is shipped from the factory oriented for floor monitor use so that, in a horizontal position, its HF coverage is 90 degrees horizontal by 40 degrees vertical. For operating it in an upright position as a PA loudspeaker, normally the horn should be rotated so its horizontal coverage pattern will be 90 degrees. (See SECTION 7.3)

4.8.7Front Grille

The front grille is powder coated, 16 gauge perforated steel, held in place with screws. This provides a secure fastening while allowing easy removal for service.

4.8.8Enclosure Finish

XLT: The XLT enclosures are finished with a dense, black carpet material held in place with an industrial strength adhesive backing.

XLTE: The XLTE enclosures are finished with a black, high durability urethane coating.

4.9OPTIONAL ACCESSORIES

Various accessories are available from Community and third party sources for mounting, supporting, or protecting the loudspeakers.

4.9.1Community Accessories

SB5 – Five foot long, 1-/3/8 in. / 35 mm O.D., black-painted steel pole for pole mounting a full-range loudspeaker on another loudspeaker such as an XLT42E on an XLT51E, or an XLT41 on an XLT51.

CSSUPKIT – Suspension kit with two steel straps that attach to the threaded inserts (T-nuts) on XLT and XLT48E models. The straps have a series of 3/8 in. / 9.5 mm diameter holes for attachment to rigging.

WB1 – Two steel brackets that can be attached to the T-nuts on XLT and XLT48E models. Used for mounting to walls or ceilings. Not usable with the XLT41E.

EYBLTKIT – Four forged steel eyebolts and four steel, locking, cup-washers for the mounting-rigging points on XLTE models (except XLT41E and XLT48E).

4.9.23rd Party Accessories

The following are some US companies that make accessories that may be used with Community Products. Outside the US, contact your Community Distributor for similar companies in your specific country or region.

Suspension Hardware / Systems			Mounting Brackets
ATM Fly-Ware™			Omnimount™ Systems
21000 South Wilmington Avenue			1501 West 17th Street
Carson, CA 90810-1247			Tempe, AZ 85281
Tel: (310) 834-5914	Fax: (310)	834- 3042	Tel: (602) 829-8000	Fax: (602) 796-5000
Road Cases			Stands and Stand Sockets
Art*Tec, Inc.			Ultimate Support™ Systems, Inc.
330 Pusey Avenue			2506 Zurich Drive
Collingdale, PA 19023			Ft. Collins, CO 80524
Tel: (800) 952-4107	Fax: (610)	461-5720	Tel: (303) 493-4488	Fax: (303) 221-2274
Star Case manufacturing Co., Inc.			Atlas/Soundolier
648 Superior Avenue			1859 Intertech Drive
Munster, IN 46321			Fenton, MO 63026
Tel: (219) 922-4446	Fax: (219)	922-4442	Tel: (314) 349-3110	Fax: (314) 349-1251

PAGE 15 Community XLT / XLTE Series Owner’s Manual