Atlas Sound XLTE owner manual 11.2MONITOR SPEAKERS AND SUBWOOFERS

11.2MONITOR SPEAKERS AND SUBWOOFERS 1

	Model:	41	48	51	55
System Type		2-Way Monitor wedge	2-Way Monitor	Trapezoidal	Trapezoidal
		and upright PA	wedge	Subwoofer	Subwoofer
Frequency Response		70 Hz - 18 kHz	50 Hz - 18 kHz	40 Hz - 250 Hz	40 Hz - 150 Hz
Sensitivity (1W / 1m SPL)		97 dB	98 dB	98 dB	98 dB
Max. Power (RMS / Program)
Passive Mode		200 W / 500 W	200 W / 500 W	125 W / 300 W	300 W / 750 W
Biamp Mode	LF	200 W / 500 W	200 W / 500 W	N/A	N/A
	HF	50 W / 125 W	50 W / 125 W	N/A	N/A
Impedance
Passive Mode		8 Ohms (min 5.2)	8 Ohms (min 5.5)	8 Ohms (min 7.8)	4 Ohms (min 4.4)
Biamp Mode	LF	8 Ohms (min 5.2)	8 Ohms (min 5.5)	N/A	N/A
	HF	8 Ohms	8 Ohms	N/A	N/A
Nominal Coverage H x V		90° x 40° 2	90° x 40°	Omni	Omni
Crossover:	Type	12 dB/octave	12 dB/octave	High-pass output	High-pass output
	Frequency	2 kHz	2 kHz	150 Hz	150 Hz
Passive/Biamp Switch		Yes	Yes	N/A	N/A
HF Level Switch		+4 dB / Flat	+4 dB / Flat	N/A	N/A
PowerSense™ DDP 3		Yes	Yes	Yes	Yes
With Front / Rear Indication
Drivers	HF 4	1" / 25 mm titanium	1" / 25 mm titanium	N/A	N/A
	LF	12" / 305 mm	15" / 381 mm	1 x 15" / 381 mm	2 x 15" / 381 mm
Input Connectors
Neutrik NL4MP (Passive/Biamp)		(2) In parallel	(2) In parallel	(2) In parallel	(2) In parallel
1/4” Jack (Passive only)		(2) In parallel	(2) In parallel	(2) In parallel	(2) In parallel
XLT Enclosure Material
	XLT	N/A	Oriented strand board	Oriented strand board	Oriented strand board
	XLTE	13-ply Baltic birch	13-ply Baltic birch	13-ply Baltic birch	13-ply Baltic birch
Mounting Points
XLT (5/16-18 T-nuts)		N/A	Sides	Sides/top/bottom	Sides/top/bottom
XLTE(3/8-16 rig points)		Nono	Sides (5/16-18 T-nuts)	3 top, 3 bottom	3 top, 3 bottom
Stand / Pole Socket		1-3/8” / 35 mm	Attachment points	1-3/8” / 35 mm	None
		diameter	for external socket	diameter
All-Steel Handles		One on end	One on each side	One on each side	One on each side
XLT Corner Protectors		N/A	Yes	Yes	Yes
XLTE Rubber Feet		Yes	Yes	Yes	Yes
Enclosure Finishes
	XLT	N/A	Black Carpet	Black Carpet	Black Carpet
	XLTE	Black Paint 1	Black Paint 1	Black Paint	Black Paint
Grille	Material	16 Gauge perf steel 1	16 Gauge perf steel 1	16 Gauge perf steel	16 Gauge perf steel
	Finish	Black paint 1	Black paint 1	Black paint	Black paint
Dimensions 5	Height	14.9" / 379 mm 6	19.3" / 483 mm 6	27" / 686 mm	41.9" / 1065 mm
	Width (front)	24.4" / 620 mm 6	20.3" / 515 mm 6	20" / 507 mm	20.3" / 515 mm
	Width (rear)	24.4" / 620 mm 6	20.3" / 515 mm 6	20" / 507 mm	13.7" / 337 mm
	Depth	15.6" / 395 mm 6	31.5" / 800 mm 6	18.4" / 468 mm	18.2" / 457 mm
Pitch between sides		30 or 45 degrees 7	30 degrees 7	0 degrees	22 degrees
Weight	XLT	52 lb. / 23.6 kg	62.5 lb. / 28.4 kg	59 lb. / 26.8 kg	89 lb. / 40.4 kg
	XLTE	49.5 lb. / 22.5 kg	60 lb. / 27.2 kg	66.5 lb. / 30.2 kg	89 lb. / 40.4 kg

1See APPENDIX for additional specifications for XLT41E and XLT48E.

2Horn can be rotated 90 degrees to reverse horizontal and vertical coverage pattern.

3DDP = Dynamic Driver Protection.

4Driver has as 2” diameter diaphragm and 1” exit.

5Dimensions are for XLT models including corners. XLTE dimensions will vary up to approximately +/- 0.5 in. (+/- 13 mm) from the listed dimensions.

6Dimensions are for normal operating position as a floor monitor.

7For monitors: pitch = Slant angle of front from horizontal in normal operating position.

PAGE 37 Community XLT / XLTE Series Owner’s Manual