11 TECHNICAL SPECIFICATIONS
(Note: Specifications subject to change without notice)
11.1FULL-RANGE MODELS
| Model: | 42 | 43 | 46 | 47 |
System Type |
| ||||
Frequency Response | 70 Hz - 18 kHz | 50 Hz - 18 kHz | 50 Hz - 18 kHz | 50 Hz - 18 kHz | |
Sensitivity (1W / 1m SPL) | 97 dB | 98 dB | 99 dB | 101 dB | |
Max. Power (RMS / Program) |
|
|
|
| |
Passive Mode |
| 200 W / 500 W | 200 W / 500 W | 200 W / 500 W | 400 W / 1000 W |
Biamp Mode | LF | 200 W / 500 W | 200 W / 500 W | 200 W / 500 W | 400 W / 1000 W |
| HF | 50 W / 125 W | 50 W / 125 W | 80 W / 200 W | 50 W / 125 W |
Impedance |
|
|
|
|
|
Passive Mode |
| 8 Ohms (min 5.6) | 8 Ohms (min 5.3) | 4 Ohms (min 5.1) | 4 Ohms (min 3.2) |
Biamp Mode: LF | 8 Ohms (min 5.6) | 8 Ohms (min 5.3) | 4 Ohms (min 5.1) | 4 Ohms (min 3.2) | |
| HF | 8 Ohms | 8 Ohms | 8 Ohms | 8 Ohms |
Nominal Coverage H x V | 90° x 40° 1 | 90° x 40° | 60° x 40° 1 | 80° x 40° | |
Crossover: | Type | 12 dB/octave | 12 dB/octave | 12 dB/octave | 12 dB/octave |
| Frequency | 2 kHz | 2 kHz | 500 Hz / 2.5 kHz | 1.8 kHz |
Passive/Biamp Switch | Yes | Yes | Yes | Yes | |
HF Level Switch |
| +4 dB / Flat | +4 dB / Flat | +4 dB / Flat | +4 dB / Flat |
PowerSense™ DDP 2 | Yes | Yes | Yes | Yes | |
With Front / Rear Indication |
|
|
|
| |
Drivers | HF 3 | 1" / 25 mm Titanium | 1" / 25 mm Titanium | 1" / 25 mm Titanium | 1" / 25 mm Titanium |
| MF | N/A | N/A | 6.5" / 165 mm Cone | N/A |
| LF | 12" / 305 mm | 15" / 381 mm | 15" / 381 mm | 2 x 15" / 381 mm |
Input Connectors |
|
|
|
|
|
Neutrik NL4MP (Passive / Biamp) | (2) In parallel | (2) In parallel | (2) In parallel | (2) In parallel | |
1/4” Jack (Passive Mode only) | (2) In parallel | (2) In parallel | (2) In parallel | (2) In parallel | |
XLT Enclosure Material |
|
|
|
| |
| XLT | N/A | Oriented strand board | Oriented strand board | Oriented strand board |
| XLTE | ||||
Mounting Points |
|
|
|
|
|
N/A | Sides/top/bottom | Sides/top/bottom | Sides/top/bottom | ||
XLTE | 3 top, 3 bottom | 3 top, 3 bottom | 3 top, 3 bottom | 3 top, 3 bottom | |
Stand / Pole Socket | Attachment points | None | |||
|
| diameter | diameter | for external socket |
|
| One on end | One on each side | One on each side | One on each side | |
XLT Corner Protectors | N/A | Yes | Yes | Yes | |
XLTE Rubber Feet |
| Yes | Yes | Yes | Yes |
Enclosure Finishes |
|
|
|
| |
| XLT | N/A | Black Carpet | Black Carpet | Black Carpet |
| XLTE | Black Paint | Black Paint | Black Paint | Black Paint |
Grille | Material | 16 Gauge perf steel | 16 Gauge perf steel | 16 Gauge perf steel | 16 Gauge perf steel |
| Finish | Black paint | Black paint | Black paint | Black paint |
Dimensions 4 | Height | 23.4" / 618 mm | 26.9" / 684 mm | 33.9" / 862 mm | 41.9" / 1065 mm |
| Width (front) | 14.6" / 371 mm | 20.3" / 515 mm | 20.3" / 515 mm | 20.3" / 515 mm |
| 9.2" / 234 mm | 13.7" / 347 mm | 13.7" / 347 mm | 13.7" / 347 mm | |
| Width (rear) | ||||
| 14.75" / 375 mm | 18.2" / 463 mm | 18.2" / 463 mm | 18.2" / 463 mm | |
| Depth | ||||
|
|
|
|
| |
Pitch between sides | 22 degrees | 22 degrees | 22 degrees | 22 degrees | |
Weight | XLT | N/A | 68.5 lb. / 31.1 kg | 86.5 lb. / 39.2 kg | 102 lb. / 46.3 kg |
| XLTE | 53.5 lb. / 24.3 kg | 68.5 lb. / 31.1 kg | 85 lb. / 38.6 kg | 95 lb. / 43.1 kg |
1Horn can be rotated 90 degrees to reverse horizontal and vertical coverage pattern.
2DDP = Dynamic Driver Protection.
3Driver has as 2” diameter diaphragm and 1” exit.
4Dimensions are for XLT models including corners. XLTE dimensions will vary up to approximately +/- 0.5 in. (+/- 13 mm) from those listed. Model 42 is correct because it is only available as part of the XLTE Series.
PAGE 36 Community XLT / XLTE Series Owner’s Manual
