C H A P T E R I I - J T A G I C E I N T E R F A C E S

ARM®

ARM REALVIEW® TRACE™ CAPTURE UNIT

ARM REALVIEW® ICE &

MULTI-ICE JTAG INTERFACE UNIT

CONTACTS

USA

Arrow Electronics

Phone: (1) 949-470-3555

e-mail: armsupport@arrow.com

ARM RealView RVT Trace capture unit

is an add-on for RealView ICE to capture output from the ARM Embedded Trace Macrocell™. ARM RealView ICE supports all ARM processors and can be expanded with additional modules for extended functionality, such as Trace capture.

Supported Platforms

Windows® 2000, XP

Note: Cannot be used standalone.

This product is designed to be used in conjunction with a RealView ICE run control unit.

•Deep programmable depth trace buffer.

-4 million processor cycles using a

4 bit trace port (with timestamp)

-2 million processor cycles using a 8/16 bit trace port (with timestamp)

-8 million processor cycles using a 4 bit trace port (no timestamp)

-4 million processor cycles using a 8/16 bit trace port (no timestamp)

•Maximum operating frequency

-Maximum trace clock frequency 250 MHz

•Fast on-the-fly trace data upload

•Fully variable trigger position

•ETM protocols v1.x, v2.x, v3.x for ETM7™ and ETM9™

•ETM trace ports modes supported:

-Single and doubled edged clocking

-4, 8, 16-bit data port widths

•Time stamp (48-bit) 10ns resolution 32 day duration

The ARM RealView ICE run control unit provides the software and hardware interface to ARM processor-basedsystem-on-chip (SoC) devices using the industry standard JTAG connection. It is designed for optimum performance with RealView Developer Suite debugger, offering unparalleled depth and breadth of support for ARM processor- based devices and is currently only supported by this debugger.

ARM RealView ICE supports all ARM processors and can be expanded with additional modules for extended functionality, such as Trace capture. RealView ICE is an essential tool in the ARM system debug environment for devices that contain the EmbeddedICE® logic and Embedded Trace Macrocell™ components.

For more information please visit www.arm.com/products/DevTools

•High performance debug

•Code download up to 500 KBytes/sec at 10 MHz JTAG clock

•High speed single-stepping

•New differential signal probe for high JTAG frequencies (up to 50MHz) and longer cable lengths

•Low JTAG clock rates (down to 3kHz) support FPGA prototyping (Lower clock rates planned)

•Network connection

•Ethernet 10/100baseT

•USB connection (Windows platforms only) USB 1.1 & USB 2.0

EUROPE

Unique-memec

Phone: (44) 1296 311599

e-mail:

armsupport@unique.eu.memec.com

JAPAN/ASIA PACIFIC

YDC Corporation

Phone: (81) 42 333 6216

e-mail: arm_support@ydc.co.jp

WEB SITE

www.arm.com

II-04