C H A P T E R V - R E F E R E N C E D E S I G N S
INICORE INC.
SYSTEM DESIGN BOARD SBD-750/1000
CONTACTS
USA
Inicore Inc.
5600 Mowry School Road
Suite 180, Newark,
CA 94536 - USA
Phone: (+1) (510) 445 1529
Fax: (+1) (510) 656 0995
e-mail: info@inicore.com
Contact Person:
Technical:
Daniel Leu
email: daniel@inicore.com
Sales:
Hans J. Kuffer
e-mail: hansjk@inicore.com
The SDB-750/1000is powered by the ARM7TDMI 32-bit RISC processor based AT91R40807. In combination with the 2 Mbytes SRAM and 16 MBytes of program memory (FLASH), the board operates in a standalone mode. It is available with an up to one million gates ProASIC PLUS FPGA from Actel.
The SDB-750/1000can be used in a wide range of applications. Whether high performance, compute-intensive applications or industrial applications or systems in need of advanced power management, they are all well supported by the AT91 CPU. The PMC port with the PTMC extension opens the door to the telecom sector.
Software Support
The SDB-750/1000runs the eCos operating system from RedHat. The GCC tool suite running on Linux and Windows platforms supports software design. The JTAG in-circuit emulator (ICE) interface eases system debugging. Also, a serial port can be used to interface to a GDB debugger running on a host computer.
In-System Programming
The SDB-750/1000supports the reprogramming of the FPGA by using a standard
JTAG header or by the on-board RISC- processor.
Interfaces and Hardware Support
The SDB-750/1000is designed to support real System-on-Chip applications. The external CPU can be disabled and replaced with a controller residing inside the ProASIC PLUS device. All external resources such as SRAM and FLASH memory are available to the on-board CPU.
•ARM7TDMI CPU AT91R40807 from Atmel
•eCOS Operating System from RedHat
•2 MByte SRAM, 16 MByte FLASH
-64-bit wide SRAM (PC100)
-Compact Flash Slot
•PMC Expansion, Supporting
-IEEE P1386.1
-PCIMG 2.15 (PTMC)
-64-bit PCI
