10
Floorboard Style Modelers
RETURN
SEND - L
EFFECTS
LOOP
SEND - R
MODEL REACTOR 11
2
Atomic Amplifiers LLC.
Orange CT.
FUSE 0101010101
!CAUTION!
RETURN
SEND - L
EFFECTS
LOOP
SEND -
R
MODEL REACTOR 11
2
Atomic Amplifiers LLC.
Orange CT.
FUSE 0101010101
!CAUTION!
X Using two Reactor
112s Install blank
templates onto the
DS-1 docking units.
(see page 10)
Y Replace the DS-1’s back into
the docking bays located in the
top of the Reactors making
sure that the dock locks click
into position.
ZPlug the Left and Right
outputs of your Foot
Controller style modeler or
preamp into the pair of
Reactor’s RETURN inputs.
[ If using outboard effects pedals
or devices with your modeler,
connect them as normal per the
manufacturer’s instructions.
\It is a good idea to make
sure the output levels are
turned down on your
modeler.
] Turn the modeler’s
power on.
^ Turn the Reactors power switches to
the ON position (they should light up).
_Bring up the levels on your modeler and
switch to some of your favorite presets.
Z
Y
Y
Z
X
X
]
^^