Atomic 112 owner manual Pro Rack Type Modelers or Preamps

Pro Rack Type Modelers or Preamps

X

Y

X

Y

EFFECTS

LOOP

ZZEFFECTS

LOOP

RETURN		MODEL REACTOR 112	RETURN
		Atomic Amplifiers LLC.
		Orange CT.
SEND - L			SEND - L
	!CAUTION!	0101010101	!CAUTION!
SEND - R	FUSE		[ SEND - R

MODEL REACTOR 112

Atomic Amplifiers LLC.

Orange CT.

FUSE0101010101

XUsing two Reactor 112s Install blank templates onto the DS-1 docking units. (see page 10)

YReplace the DS-1’s back into the docking bays located in the top of the Reactors making sure that the dock locks click into position.

ZPlug the Left and Right outputs of your Pro-Rack style modeler or preamp into the pair of Reactor’s RETURN inputs.

[If using outboard effects pedals or devices with your modeler, connect them as normal per the manufacturer’s instructions

\It is a good idea to ] If using outboard effects

make sure thepedals or devices with your

output levels are	modeler, connect them as
turned down on	normal per the manufacturer’s
your modeler.	instructions.

Turn the Reactors power switches to the	Bring up the levels on your modeler and
^ON position (they should light up).	_ switch to some of your favorite presets.
	11