Atomic 112 \X

RETURN

SEND - L

EFFECTS

LOOP

SEND - R

MODEL REACTOR 112

Atomic Amplifiers LLC.

Orange CT.

FUSE 0101010101

!CAUTION!

The Reactor 112 has a voltage selector switch and can be used in most countries. The switch

selects between 115Volts (US use) and 240Volts (European use). IMPORTANT! For use in the

United States the voltage selector switch should be set to the 115v setting at all times!

Accepts a standard grounded AC cable.

The Fuse Holder houses the power fuse (see pages 15 &16)

The RETURN is unbalanced and provides an input directly to the Reactor’s amplifier. Inserting a

jack into the RETURN interrupts the signal from the left output feed from the DS-1. The RETURN

can be used as an outboard effect return (see page 7), or as the Reactor’s main input when using

rack or floor style modelers and not using the DS-1 (see pages 11,12 &13).

SENDS - L and R are unbalanced and are direct sends from the Left and Right outputs of the

modeler when housed in the DS-1 docking unit. SEND – L can provide a feed to outboard effects

devices or to a sound reinforcement or recording console (see page 8). SEND – L can be also be

used to feed signal to a second Reactor for “mono stacking” (see page 11). SEND – R is switched

so if engaged converts a modeler housed in the DS-1 for stereo output, SEND – R is used to send

your modelers right signal to a second Reactor for stereo operation. (See page 8 & 10). Please

note that SEND – L and SEND – R are proprietary to the DS-1 and are not operational when

using modelers or preamps outside of the DS-1. Those products should be used according

to their instruction manuals.

The Reactor 112 comes equipped with a special “studio quiet” cooling fan.

registration card, or by logging onto www.atomicamps.com

[

]