Audio Analogue SRL Cento VT owner manual Troubleshooting, Symptom Cause Remedy

13

TROUBLESHOOTING

Symptom	Cause	Remedy
No leds on	Incorrectly plugged power cord	Make sure the power cord is correctly
No sound		plugged into the wall outlet
	Burned-out fuses	Contact your Audio Analogue retailer
		for fuse check and substitution
One led in on	Low volume	Increase volume
No sound	Faulty or incorrectly plugged signal	Check cords and their connection
	connectors between Primo Cento VT
	and the sources
	Off or incorrectly selected source	Check if the source is on and active
		and if the correct in is selected
	Faulty or incorrectly plugged power	Check cords and their connection
	connectors between Primo Cento VT
	and the speakers
In leds are on, volume control working	Faulty or incorrectly plugged front	Contact your Audio Analogue retailer
but volume leds are off or in leds are	panel	for connections check and front panel
off but volume leds are on		substitution
Remote controller doesn’t work	Incorrectly selected source	Select the right source using the in
		selector
	No battery/ worn-out battery	Place/replace battery (2 ‘AAA’
		batteries)
	You’re standing too far or on an	Get closer to the unit or reduce angle
	exceeding angle from the front panel

If the suggested remedies should not work or the problem is not shown in the list above, please contact your local Audio Analogue retailer.