3

INTRODUCTION

AUDIO ANALOGUE does not take any responsibilities in the following cases:

Whenever the operational procedures related to the use and the maintenance of the equipment as described in this manual are not respected.

Whenever damages to the equipment occur because of fixing and modifications made form non-authorized staff or because of normal deterioration of the system.

No part of this manual can be reproduced by any means, transmitted or copied for private or public use without private authorization from AUDIO ANALOGUE.

The information contained in this manual is related to the data kept by AUDIO ANALOGUE at the moment of the issue o f this publication; AUDIO ANALOGUE has the right to make changes to this document without prior notice.

The equipment has been projected and manufactured according to the Regulations of the Community 89/336/CEE and is marked CE. This equipment can’t be used for different purposes other than those for which it has been manufactured.

AUDIO ANALOGUE does not take any responsibilities for accidents or damages due to improper use of the equipment.

WARNING

Please do respect the safety standards contained in this manual before starting to operate the equipment.

Do not open the equipment. No further interventions than those described in this manual should be made. For technical assistance, please consult a qualified technician or an AUDIO ANALOGUE dealer.

Not respecting the instructions contained in this manual will invalidate the terms and conditions of the guarantee.

NECESSARY PRECAUTIONS FOR SAFETY AND MAINTENANCE

ATTENTION: before starting any operation, use or maintenance of the equipment it is strictly necessary to understand the following manual.

To avoid any accidents or hazards it is necessary to follow the following regulations.

Activate the equipment only prior checking if the installation has been properly made, and if it is related to the instructions contained in this manual.

Avoid installing the equipment in places subjected to extremely high temperatures or humidity. Check that the labels containing information about safety are always visible and in good conditions.

Ensure to not obstruct ventilation, to avoid excessive overheating. The equipment should be kept to a minimal distance of 15 cm from any object and not to place on carpet or other soft surfaces. Also the installation close to radiators or in close environments without ventilation should be avoided.

Do not switch on the equipment until it has not been correctly and completely installed.

Only supply the equipment with the kind of the electric supply as stated on the appropriate label. If in doubts about the kind of supply available, please consult an expert technician for technical assistance.

The equipment needs to be wired to an earth terminal. The external case is metal made; a defective connection with the earth may be dangerous.

In case damages occurs to the supply cable, it should be immediately replaced with the same kind of cable. This operation should be only made prior to disconnecting the main supply.

Do not place objects on the supply cable and check that this is not positioned in way through. The cable should not be knotted or curly.

Replace the fuses always with other of the same kind.

Do not use the equipment close to the water or other liquids. If liquid entered the equipment, the plug should be disconnected from the socket avoiding to touch the metal parts. Competent technical staff should be asked to check the equipment before operating it again.

Do not place recipients containing liquids on the equipment. Even when it is switched off. Keep the equipment far from sources of heat such as the solar light, kitchens, radiators etc… Always unplug the supply cable during rainy weather.

Always Switch off and unplug the supply cable before cleaning the equipment externally.: this operation should be made using a dry and soft cloth. Never use alcohol based cleaning material.

If the amplifier was carried from an extremely cold environment to and extremely hot one, it could create internal condensation, causing possible bad functioning.

If this occurs, please wait for at least an hour before using it again, to allow it to gradually reach room temperature. When not used for long periods, please unplug the equipment.

INSTRUCTIONS TO PUT IT OUT OF SERVICE

Consult qualified staff

Follow the regulations of the current legislation regarding recycling and waste disposal.

Page 2 Page 4
Page 3
Image 3
Audio Analogue SRL Cento VT owner manual Introduction
Page 2 Page 4

Cento VT specifications

Audio Analogue has long been recognized for its commitment to delivering high-quality audio equipment, and the Cento VT is no exception. This integrated amplifier stands out as a testament to the brand's dedication to musicality, craftsmanship, and innovative technology.

At the heart of the Cento VT is a robust power amplifier section that is capable of delivering 130 watts per channel into 8 ohms, ensuring ample power for driving a wide range of speakers. The amplifier employs the latest Class A/B technology, allowing it to achieve exceptional audio performance with low distortion and excellent dynamic range. This means that whether you are listening to delicate acoustic passages or full orchestral works, the Cento VT can reproduce every detail with clarity and precision.

One of the key features of the Cento VT is its built-in digital-to-analog converter (DAC). This DAC supports high-resolution audio formats, including PCM up to 24-bit/192 kHz, making it ideal for those who enjoy streaming high-quality digital music. The inclusion of this technology allows users to connect various digital sources, such as computers or network players, simply and effectively, ensuring that the sound quality remains uncompromised.

Additionally, the Cento VT boasts a high-quality phono stage, accommodating both moving magnet (MM) and moving coil (MC) cartridges. This versatility makes it an excellent choice for vinyl enthusiasts, allowing them to enjoy their favorite records with the fidelity they deserve. The phono stage is designed to provide an optimal listening experience, imparting warmth and depth to vinyl playback.

The user-friendly interface of the Cento VT ensures that navigating its features is a seamless experience. The amplifier comes equipped with a remote control, allowing for easy adjustments from the comfort of your seat. Users will appreciate the clarity of the informational display, which provides essential feedback on settings and inputs.

In terms of build quality, the Cento VT boasts a sleek and sophisticated design that is typical of Audio Analogue products. The chassis is constructed from high-quality materials, providing durability while minimizing resonances that can adversely affect sound quality.

In conclusion, the Audio Analogue SRL Cento VT is a remarkable integrated amplifier that combines modern technology with traditional audiophile values. With its powerful amplification, high-quality DAC, versatile phono stage, and elegant design, it is an ideal choice for anyone seeking to enhance their listening experience. Whether for digital or analog sources, the Cento VT promises an engaging and immersive audio journey.
Top Page Image Contents