Aussie 69F6U00KS1 manual Storage and Transportation

22

Storage and Transportation

!WARNING

To reduce the risk of serious bodily injury or death:

•Store your LP gas grill in a cool dry place. Do not store an LP Gas Cylinder in a space greater than 125 degrees Fahrenheit. Never store a connected LP Gas Cylinder in a building, garage, or any enclosed area.

•Store LP Gas Cylinders outdoors out of reach of children.

•Never store an LP Gas Cylinder indoors (empty or filled) unless it is disconnected from the gas grill and the cylinder’s Gas Supply is turned “OFF.”

•Never leave a LP Gas Cylinder inside a vehicle that can become overheated by the sun.

•Even though your LP Gas Cylinder may appear to be empty, gas may still be present and the LP Gas Cylinder should be transported and stored accordingly.

•Never store a spare LP Gas Cylinder under or near the LP gas grill.

•Always turn off the LP Gas Cylinder at the LP Gas Cylinder valve when the gas grill is not in use.

1.Disconnect LP Gas Cylinder from grill and store outside, in a dry, well-ventilated area, away from any sources of heat or ignition. Re-cap LP Gas Cylinder valve with the Safety Cap.

2.Remove Burners and wrap with aluminum foil to prevent insects from entering the Burner holes. Store wrapped Burners in body of grill.

3.You may wrap the Cooking Grid and Flavor Activators in aluminum foil and place inside the grill body or store inside your dwelling.

4.Place a grill cover over the grill and store outdoors if possible. It may be stored indoors only if the LP Gas Cylinder is disconnected from the gas grill and stored outside.

5.Before next use, remove aluminum foil and reinstall Burners, Flavor Activators, and Cooking Grids.

6.Before using the grill after periods of storage or non-use (i.e. over winter), check your LP gas grill for gas leaks, deterioration, proper assembly, and Burner obstructions.

7.Periodically check and tighten all nuts, bolts, and screws.

CAUTION

To reduce the risk of bodily injury or property damage:

•Never transport your grill in the “Set-Up” position.

•Always lock the casters, block the wheels and secure the grill from moving when transporting.

•Always be sure latches are securely engaged when in either the “Set-Up” or “Transport” position.

•When transporting an LP cylinder, be sure it is properly secured in an upright position, not in the passenger compartment and follow all pertaining laws.