ZC Kit – Large Pellet Insert
(99200149)
Minimum Enclosure Dimensions
| Min. | Max. | Recommended |
Height* | 29” | 31” ** | 30” |
Width | 36” | 43” ** | 40” |
Depth*** | 18” | 22” **** | 20” |
*The enclosure height must be raised the same amount as the floor protection (e.g. if you are using 1” floor protection, the min. height is 30” above the
**The maximum height is determined by the surround panel size (the surround panels are 32” tall).
***When determining depth, include the facing material (drywall, tile, etc.) – see the illustration below.
****When venting vertically, there is no maximum depth.
Ceiling
NOTE: The enclosure may be raised. The minimum distance from the base of the enclosure to the ceiling is 72”
When determining the position of the insert, consider the position of the framing behind the insert relative to the vent - see the illustration below.
Depth*
Height
Width
* When determining the depth, include the facing material (drywall, tile, etc.).
7.5”
TOP VIEW
Pellet vent requires 3” clearance to combustibles
Page 4 of 8 | 10/9/06 | © Travis Industries, Inc. |