Avalon Stoves 99200149 dimensions ZC Can Placement, ZC Kit - Large Pellet Insert

ZC Kit – Large Pellet Insert

(99200149)

ZC Can Placement

•Place the zc can inside the enclosure. The zc can must be placed so the front edge of the mounting flanges are flush with the enclosure opening. Secure the enclosure to the floor protection (and sub-floor) with screws.

•When venting horizontally the rear vent shield must be installed over the top of the zc can. When installed, the rear vent shield should contact the thimble (it acts as a heat shield above the vent.

For rear vent appliations, slide the rear vent shield all the way back until it contacts the wall thimble.

Secure the zc can to the floor protection (and sub floor) with screws.

2-1/2” Min. (both sides)

When in place these tabs must be flush with the enclosure opening.

Page 7 of 8 10/9/06 © Travis Industries, Inc.