INSTALLATION REQUIREMENTS

Tools and Parts

IMPORTANT:

■Installer: Leave Installation Instructions with the homeowner.

■Homeowner: Keep Installation Instructions for future reference. Save these Installation Instructions for the local electrical inspector’s use.

TOOLS NEEDED:

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

■

Cordless drill

■

Torx®† T15 and T27 screwdrivers

■

Drill bits

■

¹¹⁄₃₂" nut driver

■

Two adjustable

■

³⁄₈", ¹⁄₄", and ¹⁄₂" open-end

 

wrenches

 

wrenches

■

Phillips screwdriver

■

⁵⁄₃₂" Allen wrench

■

Small level

■

¹⁄₄" and ⁵⁄₁₆" socket drivers

■

Appliance dolly

■

Tape measure

 

 

■

Utility knife

PARTS NEEDED:

■Six #8 x 3" (7.6 cm) wood screws (longer screws may be needed)

■One or two 2" x 4" x 32" (5 cm x 10 cm x 81 cm) wood board(s)

■Overlay Series: Make custom panels, or consult a qualified cabinetmaker or carpenter to make the panels. See “Installation Requirements” for more information.

Pro-Style®and Euro-Style are shipped complete.

■If you are connecting the water line directly to copper tubing and not to a shutoff valve, you need a ferrule, a union, and a ¹⁄₄" compression fitting.

Location Requirements

The refrigerator can be recessed in an opening between cabinets or installed at the end of a cabinet run using a side panel to enclose the refrigerator.

WARNING

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT:

■Observe all governing codes and ordinances.

■It is recommended that you do not install the refrigerator near an oven, radiator, or other heat source.

■Do not install in a location where the temperature will fall below 55°F (13°C).

■Floor must support the refrigerator weight, more than 600 lbs (272 kg), door panels and contents of the refrigerator.

■Ceiling height must allow for side tipping radius. See “Tipping Radius.”

■Location should permit door to open fully. See “Door Swing Dimensions.”

■Location must permit top grille removal. See “Opening Dimensions.”

Opening Dimensions

■To avoid tipping during use, the solid soffit must be within 1" (2.5 cm) maximum above the refrigerator. If the solid soffit is higher than 1" (2.5 cm) or one is not available, then the refrigerator must be braced.

If the anti-tip boards are needed, they must be attached to the rear wall studs 80" to 90" (203 to 229 cm) above the floor. See “Install Anti-Tip Boards” for more information.

NOTE: A clearance of ¹⁄₂" (1.3 cm) must be maintained in front of the refrigerator’s side trim in order for the top grille to be removed.

¹⁄₂"

(1.3 cm)

†®TORX is a registered trademark of Textron Innovations Inc.

6

Page 5 Page 7
Page 6
Image 6
Jenn-Air W10183782A manual Installation Requirements, Tools and Parts, Location Requirements, Opening Dimensions
Page 5 Page 7

W10183782A specifications

The Jenn-Air W10183782A is a sophisticated and innovative appliance designed to enhance kitchen efficiency and culinary creativity. A standout in the realm of appliance technology, this model embodies the perfect integration of style, functionality, and advanced engineering.

One of the most notable features of the Jenn-Air W10183782A is its versatile cooktop design. It seamlessly combines gas, electric, and induction cooking surfaces, allowing users to choose their preferred cooking method for different recipes. This flexibility not only caters to diverse cooking styles but also ensures that users can achieve optimal results with precision and ease.

The cooktop also boasts advanced temperature control capabilities. With digital displays and adjustable settings, chefs can easily monitor and adjust heat levels for a variety of dishes. This technology reduces the risk of overcooking or burning food, making it ideal for both novice cooks and seasoned chefs. Additionally, the cooktop offers a rapid heat-up time, ensuring that meal preparation is efficient without sacrificing quality.

Another key characteristic of the Jenn-Air W10183782A is its sleek and modern design. Featuring a stainless-steel finish and elegant lines, this appliance is not just a functional tool but also an attractive addition to any contemporary kitchen. Its laid-back elegance complements existing decor, while its durability ensures that it will withstand the rigors of daily use.

The W10183782A is also equipped with smart features that enhance user experience. It offers compatibility with smart home technologies, allowing users to control cooking settings remotely through a smartphone app. This connectivity ensures that users can manage cooking processes, set timers, and preheat appliances while multitasking.

Moreover, safety is a paramount consideration in the Jenn-Air W10183782A design. It includes features such as automatic shut-off, child lock functions, and warning indicators for hot surfaces. These characteristics prioritize user safety, providing peace of mind during meal preparation.

In conclusion, the Jenn-Air W10183782A exemplifies modern appliance innovation, combining advanced cooking technology with stylish aesthetics. Its versatile cooktop, precise control, smart capabilities, and safety features make it a must-have for those seeking both functionality and elegance in their kitchen. Whether for everyday meals or gourmet dinner parties, this appliance caters to every cooking need with unmatched efficiency and style.
Top Page Image Contents