Install Base Grille

There are two pieces to the base grille to allow for a custom fit: the base grille itself and the skirt. The skirt can be added to the base grille in order to extend it all the way to the floor.

1.To see if the skirt is needed, place the base grille into position. Do not attach the base grille to the refrigerator. Measure the distance between the bottom of the base grille and the floor. The gap must be a minimum of ¹⁄₂" (1.27 cm) in order to add the skirt.

NOTE: If the gap measures less than ¹⁄₂" (1.27 cm), skip steps 3 and 4 of the instructions, and install the base grille only.

2.Remove the film from the base grille.

3.Snap the skirt onto the base grille.

A

B

A. Base grille

B.Skirt

4.Trim the skirt by scoring the proper “V” groove with a utility knife. Break the skirt at the score line.

A

A. “V” groove

5.Using the two screws, attach the base grille assembly to the refrigerator as shown.

NOTE: Drive in the right side screw first.

A

A. Screws (2)

Complete Installation

1.Turn the water supply line valve to the “Open” position.

2.Turn the refrigerator switch to the ON position. See “Power On/Off Switch” in the Use & Care Guide for instructions. Wait a few minutes. Check the water line connections for leaks.

3.Remove all boxes, parts packages and packing materials from the interior of the refrigerator. See the “Cleaning” section in the Use & Care Guide for instructions. Remove the film and cardboard from the grille and doors or door frame, depending on your model.

4.Install the shelves and bins in the refrigerator and freezer compartments.

5.The controls are preset at the factory to the midpoint setting. Check that the compressor is operating properly and that all the lights are working.

6.If construction will continue after the refrigerator has been installed, set the controls to OFF.

To get the most efficient use from your new built-in refrigerator, read the Use & Care Guide. Keep Installation Instructions and Use & Care Guide near the built-in refrigerator for easy reference.

Water System Preparation

Please read before using the water system.

Immediately after installation, follow the steps below to make sure that the water system is properly cleaned.

1.Turn off the ice maker. Slide the ice maker On/Off control, located on the left-hand side of the ice bin, to the OFF (down) position as shown.

A

A. On/Off control

NOTE: If your model has a base grille filter system, make sure the base grille filter is properly installed.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

2.Turn on the ice maker. Slide the ice maker On/Off control, located on the left-hand side of the ice bin, to the ON (up) position. Please refer to “Ice Maker and Storage Bin” for further instructions on the operation of your ice maker.

Allow 24 hours to produce the first batch of ice.

Discard the first three batches of ice produced.

27

Page 27
Image 27
Jenn-Air W10183782A manual Install Base Grille, Complete Installation, Water System Preparation

W10183782A specifications

The Jenn-Air W10183782A is a sophisticated and innovative appliance designed to enhance kitchen efficiency and culinary creativity. A standout in the realm of appliance technology, this model embodies the perfect integration of style, functionality, and advanced engineering.

One of the most notable features of the Jenn-Air W10183782A is its versatile cooktop design. It seamlessly combines gas, electric, and induction cooking surfaces, allowing users to choose their preferred cooking method for different recipes. This flexibility not only caters to diverse cooking styles but also ensures that users can achieve optimal results with precision and ease.

The cooktop also boasts advanced temperature control capabilities. With digital displays and adjustable settings, chefs can easily monitor and adjust heat levels for a variety of dishes. This technology reduces the risk of overcooking or burning food, making it ideal for both novice cooks and seasoned chefs. Additionally, the cooktop offers a rapid heat-up time, ensuring that meal preparation is efficient without sacrificing quality.

Another key characteristic of the Jenn-Air W10183782A is its sleek and modern design. Featuring a stainless-steel finish and elegant lines, this appliance is not just a functional tool but also an attractive addition to any contemporary kitchen. Its laid-back elegance complements existing decor, while its durability ensures that it will withstand the rigors of daily use.

The W10183782A is also equipped with smart features that enhance user experience. It offers compatibility with smart home technologies, allowing users to control cooking settings remotely through a smartphone app. This connectivity ensures that users can manage cooking processes, set timers, and preheat appliances while multitasking.

Moreover, safety is a paramount consideration in the Jenn-Air W10183782A design. It includes features such as automatic shut-off, child lock functions, and warning indicators for hot surfaces. These characteristics prioritize user safety, providing peace of mind during meal preparation.

In conclusion, the Jenn-Air W10183782A exemplifies modern appliance innovation, combining advanced cooking technology with stylish aesthetics. Its versatile cooktop, precise control, smart capabilities, and safety features make it a must-have for those seeking both functionality and elegance in their kitchen. Whether for everyday meals or gourmet dinner parties, this appliance caters to every cooking need with unmatched efficiency and style.