Overview

This Quick setup guide covers the basic administration tasks to set up SIP and H.323 video endpoints. For detailed information, see Avaya video conferencing Solutions Networking Guide

6.0. This guide is intended for technicians installing the following video endpoints:

SIP endpoints

Avaya Series 1000 Video Conferencing Endpoints

Avaya one-X®Communicator

H.323 endpoints

Polycom HDX video calling systems

Polycom RMX video conferencing bridge platforms

Polycom PathNavigator/CMA Gatekeeper

Avaya one-X®Communicator

Prerequisites

Avaya Aura™ Communication Manager Release 6.0 is installed and functional.

Avaya Aura™ System Manager 6.0 is installed and functional.

Avaya Aura™ Session Manager is installed and functional.

The SIP or H.323 endpoint is installed installed and functional.

Note:

Installation of video features on the endpoints requires Session Manager to be configured. For instructions, see Administering Avaya Aura™ Session Manager on http://support.avaya.com.

Note:

All Avaya AuraTM components and endpoints must be connected to the network and able to communicate with each other.

Familiarity with System Manager domains, SIP entities, entity links, locations,routing, and dial patterns.

Familiarity with administering Communication Manager, Domains on Signaling Group and IP Network Regions, AAR/ARS routing, and endpoint interfaces.

AVTS R 6.0 Quick Setup

For feedback, use document@avaya.com

August 2010 4

Page 4
Image 4
Avaya 16-300310 manual Overview, Prerequisites