Avaya P334T-ML manual Sys

			Chapter 6 Avaya P334T-ML Front and Rear Panels
Table 6.1	Avaya P334T-MLLED Descriptions (Continued)
LED Name		Description		LED Status
				OFF – Module is a slave in a stack
				ON – Module is the master of the stack and
				the Octaplane and Redundant (optional)
SYS		System Status		cable(s) are connected correctly.
				This LED will also light in Standalone mode.
				Blink – Box is the master of the stack and the
				Octaplane is in redundant mode.
ROUT		Routing Mode		OFF – Layer 2 mode
				ON – Router mode
The following Function LEDs apply to all ports
				ON – Link is OK
LNK		Port Status		OFF – Port is disabled
				Blink – Port is enabled, but Link is down
				OFF – No collision or full-duplex port for
COL		Collision		ports 1 -48; always OFF for ports 51-52.
				ON – Collision occurred on line.
				OFF – No transmit activity
Tx		Transmit to line
				ON – Data transmitted on line from the
				module
				OFF – No receive activity
Rx		Receive from line
				ON – Data received from the line into the
				module
				ON – Full duplex mode (ports 1-48)
				OFF – Half duplex mode (ports 1-48)
FDX		Full Duplex mode		Always ON for ports 51,52 (full-duplex mode
				only)

Avaya P334T-ML User’s Guide 29