Chapter 2: Installation

11

 

 

Installing an AutoView Switch

Installing your AutoView 424

The diagram below illustrates one possible configuration for your AutoView 424 switch. Follow the step-by-step procedure To install an AutoView 424 switch to properly install your new switch.

DB9 Serial Port for Updating Firmware

Server 1

Extended Access User (Via LongView)

Local User

AutoView 424

Servers 2-18

Figure 2.2: AutoView 424 Installation Example

WARNING: To reduce the risk of electric shock or damage to your equipment -

-Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

-Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.

-Disconnect the power from the unit by unplugging the power cord from either the electrical outlet or the unit.