Chapter 3: Basic Operations

27

 

 

To create the administrator account:

1.Press the Control key twice to access the Administrator Channel List.

2.Press the Control key twice again to access the Command menu.

3.Select Administrator Functions - Setup Administrator. The Administrator Setup screen appears.

4.Type your password and press Enter. (The password is not case sensitive.)

5.Re-enter the password for confirmation.

6.Enter the number of minutes you wish to pass without keyboard/mouse activity before the administrator is automatically logged out of the system. Entering Ø keeps the administrator logged on continuously; 60 is the maximum setting.

CAUTION: Security is enabled once the password has been created. Store a copy of your password in a safe place.

You should now see the option F10 - Logout at the bottom of your Administrator Channel List and a lock symbol to the right of the menu headings.

To set up additional users:

1.Press the Control key twice to access the Administrator Channel List.

2.Press the Control key twice again to access the Command menu.

3.Select Administrator Functions - Setup User 1.

4.Highlight Name and type the name for this user.

5.Highlight Password and type the password, then confirm it for this user. (Passwords are not case sensitive.)

6.Highlight Logout Time. Type a value in minutes for this user’s logout time. A value of Ø keeps the user logged on continuously; 60 is the maximum setting. The default is set for 5 minutes.

7.Highlight Access Setup. You will see a listing of all attached servers in the channel list. For each server, choose a level of access for this user by selecting one of the function keys listed on the screen: F5 for no access, F6 for video only or F7 for video and keyboard/mouse capability. The default is set for full access. All changes go into effect immediately. Press Enter when you are finished.

8.Press Enter to accept your selections and repeat steps 3-7 for each remaining user.