14AutoView 424 Installer/User Guide

LongView Receiver

RECEIVER

VAK-1 Video

Adaptor

VAK-1 Keyboard/

Mouse Adaptor 13W3 Video

Connector

Keyboard/Mouse

Connector

Sun User Station

Figure 2.3: Connecting Extended Access Sun Peripherals

4.Plug the ends of the 6-pin miniDIN VAK-1 keyboard/mouse adaptor into

the and ports on your LongView receiver and then plug the Sun keyboard/mouse cable into the VAK-1 adaptor.

5.Connect the Category 5 cable to the modular jack on the rear of the receiver.

6.Connect the circular power plug from the wall mount power supply to the power port on the LongView receiver. Then plug the power supply into a convenient electrical outlet. Verify that the receiver’s power LED is now lit.

7.If your extended access location utilizes Sun peripherals, you will need to configure the AutoView 424 to recognize them before they can be used. To do this:

a.At the local user, activate the OSD by pressing either of the keyboard

Control keys twice within one second.

b.Press the Control key twice more to access Administrator Commands.

c.Use your Arrow keys to highlight Administrator Functions and press Enter.