Chapter 3: Basic Operations

25

 

 

To change the size, color and position of the ID window:

1.Highlight the channel you wish to change in the Administrator Channel List.

2.Press the Control key twice. -or-

Press F3. (If you press F3, skip to step 4.)

3.Highlight Edit Channel and press Enter.

4.Highlight ID Setup and press Enter. The ID window will appear. Follow the procedures outlined in the table below to change the size, color or position of your ID window.

ID Window Settings

Operation

Procedure

Move the ID window

Use the Arrow keys to move the ID window's position on

 

the monitor. (Hold down the Shift key to move slower.) If

 

the window fl ickers but does not move, continue tapping

 

the Arrow keys until it moves back into range.

 

 

Change window background color

Press the Page Up key to cycle through the available

 

window background colors.

 

 

Change text color

Press the Page Down key to cycle through the

 

available text colors.

 

 

Change window length

Use the Plus (+) and Minus (-) keys to change the

 

length of the ID window.

 

 

Change window size

Press the Spacebar to toggle between large and small.

 

 

ID window Help

Press F1.

 

 

5.Press Enter to accept the changes or press Escape to exit the menu without saving the changes.

Setting the ID window dwell time

This menu selection lets you set the time that the ID window remains on screen after a channel switch. Each channel can be configured independently. The default time is set for five seconds.

To set the ID window dwell time:

1.Highlight the channel you wish to change in the Administrator Channel List.

2.Press the Control key twice to access the Administrator Commands menu.

3.Highlight Edit Channel and press Enter.