Chapter 2: Installation

15

 

 

d.Highlight and select the Remote User menu selection. Use the

Spacebar to cycle through peripheral types and select the ones appropriate to your system. Press Enter to select.

Attaching Multiple AutoView 424 Units

NOTE: CIFCM cables are required for cascading.

To cascade multiple AutoView 424 units:

1.Follow steps 1-5 in the procedure To install an AutoView 424 switch for each cascaded unit.

2.Plug the 25-pin “mini-D” connector of your CIFCM input cable into any available channel port on the rear of your primary AutoView 424 unit.

3.Plug the 15-pin video connector on the other end of the cable into the port

labeled on your first cascading AutoView 424 unit. Plug the PS/2 mouse connector into the port. Plug the remaining 6-pin miniDIN keyboard

connector into the port.

AutoView 424

Primary Switch

Servers 2-18

Secondary Switch

Servers 2-18

Server 1

Figure 2.4: Attaching Multiple Units