Avocent DSR1021 manual To add target devices to the Scan list, Scan Dialog Box

Chapter 3: Local Port Operation 35

To add target devices to the Scan list:

1.If the OSCAR interface is not open, press Print Screen to open the Main dialog box will appear. See Figure 3.1 on page 21 for an illustration of the Main dialog box populated with sample data.

2.Click Setup - Scan to open the Scan dialog box. Figure 3.11 shows the Scan dialog box populated with sample data.

Figure 3.11: Scan Dialog Box

3.Determine the order within the list to add the target device. If there are no target devices in the Scan list, the cursor will appear in a blank line at the top of the list.

-or-

To add a target device to the end of the list, place the cursor in the last target device entry and press the Down Arrow key.

-or-

To add a target device within an existing list, place the cursor in the line below where you want to insert a new target device and press Insert.

4.Type the first few characters of a target device name or port number to scan. The first matching target device will appear in the line.

-or-

Press the following keyboard commands in the Name, Port or Time column to move through the list of target devices available to scan.