Avocent Installing a LongView Wireless Extender, To install a LongView Wireless transmitter

6LongView Wireless Installer/User Guide

Installing a LongView Wireless Extender

Follow the procedures To install a LongView Wireless transmitter and To install a LongView Wireless receiver to properly install your new KVM extension system.

WARNING: To reduce the risk of electric shock or damage to your equipment - Disconnect the power from the device by unplugging the power supply from the electrical outlet.

To install a LongView Wireless transmitter:

1.Ensure that the video setting of your server is 1024 x 768, 800 x 600, or 640 x 480 at 60Hz refresh rate. Best performance will be achieved if the color resolution is set to 24 bit color or higher.

2.Power down the server that will be connected to your LongView Wireless extender.

3.Unplug the peripherals (keyboard, mouse, monitor and speakers with built-in amplifiers, if applicable) from your server.

Transmitter

Cables

Power

Supply

Peripheral Cables

Audio Cable

Figure 2.1: LongView Wireless Transmitter Installation Example