AXIS Q6000-E PTZ Network Camera

Recordings

Recordings

To access recordings, see Find Recordings on page 37.

To play recordings, see Play Recording on page 37.

To export a recording as a video clip, see Export Video Clip on page 38.

To configure camera controlled storage, see Storage on page 51.

Find Recordings

Recordings stored on the SD card or network share can be accessed from the Recordings > List page. The page lists all recordings on the storage device and shows each recording’s start date and time, duration and the event that triggered the recording.

Note

The recording’s start date and time is set according to the Axis product’s date and time settings. If the Axis product is configured to use a time zone different from the local time zone, make sure to configure the Recording time filters according to the product’s time zone. Date and time settings are configured under System Options > Date & Time, see Date & Time on page 43.

To find a recording, follow these steps:

1.Go to Recordings > List.

2.To reduce the number of recordings displayed, select the desired options under Filter: Recording time — List recordings that started between the From and To times.

Event — List recordings that were triggered by a specific event. Select continuous to list continuous recordings. Storage — List recordings from a specific storage device.

Sort — Specify how recordings should be sorted in the list. Results — Specify the maximum number of recordings to display.

3.To apply the filters, click the Filter button. Some filters may take a long time to complete.

4.The recordings are displayed in the Recording list.

To play a recording, select the recording and click Play. See also Play Recording on page 37.

To view detailed information about a recording, select the recording and click Properties.

To export a recording or a part of a recording as a video clip, select the recording and click Export. See also Export Video Clip on page 38.

To remove a recording from the storage device, select the recording and click Remove.

Play Recording

Recordings on the SD card or network share can be played directly from the Axis product’s webpages.

To play a recording, follow these steps:

1.Go to Recordings > List.

2.To reduce the number of recordings displayed, select the desired options under Filter and click the Filter button to apply the filters. See also Find Recordings on page 37.

37

Page 37
Image 37
Axis Communications AXIS Q6000-E user manual Find Recordings, Play Recording, Go to Recordings List