57
Axxess® Model 8690 User Guide – ITP Mode
GETTING STARTED
To enable DND:
1. Press the DND menu button.
2. EITHER, Dial the two-digit number corresponding to the message you want to
use.
OR, Press the SCROLL menu button (and PREVIOUS or NEXT) or press the Vol-
ume high button (up arrow) or Volum e low button (down arrow) to scroll through
the messages.
3. If desired, customize the second display line by dialing the desired numbers or
letters as described below:
• Remain in numeric mode (Message lamp unlit): Press the dialpad buttons to
dial the desired numbers. Press for a hyphen (-), for a colon (:),
Fwd to leave a space, or Mute to backspace.
• Change to alphanumeric mode (Message lamp lit): Press Message or the
USE ALPHA MODE menu button and then press the dialpad buttons to enter
the desired characters. (Refer to the chart below.) The number of times a but-
ton is pressed determines which character is entered. For example,
33377744432999 enters “FRIDAY.” When adjoining characters are located
under the same button, press Fwd once to advance to the next character. For
example, 6Fwd666Fwd6632999 enters “MONDAY.” (Note that letters corre-
spond to the letters printed on the buttons.) Press Fwd twice to leave a space
or press Mute to backspace.
4. Press the ACCEPT menu button or lift and replace the handset.
To cancel DND:
1. Press the DND menu button.
2. Press the DND OFF menu button.
NUMBER OF TIMES BUTTON IS PRESSED
BUTTON 1 2 3 4 5
1-&()1
2ABC'2
3DEF!3
4GHI *4
5JKL#5
6MNOÑ6
7PQRS7
8TUV?8
9WXYZ9
0@:. , 0
#
*