66 Axxess® Model 8690 User Guide – ITP Mode
MOVING ON
To set up remote messaging:
1. Access your mailbox as described on page 25.
2. Press to select the Personal Options Menu.
3. Press .
NOTE: This option is not available if you do not have Remote Messaging enabled.
4. Press to set up a primary cascade or press to set up an alternate cas-
cade.
5. Do one of the following.
• To program a cascade level: Press and enter the number of the level
you wish to program (1-9). You then have the following options:
—To set up or change an extension or telephone number: Press .
Then press for an extension number or press for an outside
number. Then enter the number.
—To set up or change a pager number: Press . Then enter the number.
—To enable or disable the cascade level: Press . (You cannot enable
the level until a notification number is programmed.)
• To set up the time of day for notification: Press . Then enter the time
you want the message notification to start and stop. Enter the times with two
digits for the hour and two digits for the minutes (e.g., 0900 = 9:00). If enter-
ing the time in 12-hour format, you are prompted to press for AM or
for PM.
NOTE: For 24-hour notification, program the starting and ending times to be
the same.
• To set up the days of the week for notification: Press . Then select
one of the following:
— Press for Monday-Friday.
— Press for all days.
— Press to select individual days. You are prompted to press digits 1-
7 which correspond to the days Sunday through Saturday.
• To select all or priority-only message notification: Press . Then press
for all messages or for priority messages only.
6. Either select another option, as described above, or press to save the settings
and exit.
4
5
1 2
1
2
1 2
3
1
2
1
2
3
1
2
3
4
1 2
#